Galvanized Knuckle Truss Nail Plate

Maɓalli Maɓalli/Abubuwa na Musamman:

farantin ƙusa na ƙungiya / farantin gyara

Haɗin Gine-gine Biyu faranti na ƙusa

Galvanized Knuckle Truss Nail Plate

Material: galvanized karfe

Tsarin aiki: Stamping / Punching / Lankwasawa

Size: Za a iya musamman

Surface: Galvanized takardar

Nau'in: Mai haɗa itace

Quality: MOQ 2000pcs

Marufi: Gabaɗaya daidaitaccen fakitin fitarwa / Karɓar marufi na musamman

Ƙayyadaddun bayanai

Gyaran faranti

Gang-Nail connector NAIL PlateS - STANDARD & SPECIAL;

Kafaffen guduma, Mai sauƙin amfani da faranti na ƙusa don aikace-aikace da yawa;

Bayani:

Gang-Nail Connector Nail faranti suna samuwa a cikin kewayon ma'auni mai faɗi kamar yadda aka kwatanta kishiyar. Ana samun manyan girma akan buƙata.

Za'a iya haɓaka wasu nau'ikan wannan farantin saboda isassun buƙatun samfurin.

Siffofin:

1. Gang-Nail connector ƙusa faranti ne galvanized karfe haši tare da a-gina, lankwasa-up kusoshi.

2. Waɗannan faranti suna da kyau don yawancin tsari da haɗin ginin katako da amfani da kariyar katako.

3. Ana amfani da su kawai ta hanyar guduma a cikin "ƙusoshi na ƙugiya" waɗannan faranti ana amfani da su ta hanyar 'yan kasuwa, masu gida, masana'antun firam da akwatin, hukumomin samar da wutar lantarki da magina.

4. Kayan aiki na musamman ba lallai ba ne.

Farantin haɗe-haɗe wani nau'in taye ne. Truss Plates su ne faranti na ƙarfe na haske da ake amfani da su don haɗa ginshiƙan firam ɗin haske da aka riga aka kera. Ana samar da su ne ta hanyar buga ma'aunin haske mai galvanized karfe domin samun hakora a gefe guda. Haƙoran za su ba da damar haɗa trusses daban-daban tare ta hanyar sanya su cikin katako ta amfani da latsa mai ruwa ko abin nadi.

An ƙera farantin haɗin truss daga ASTM A653/A653M, A591, A792/A792M, ko A167 ingantaccen ƙarfe kuma ana kiyaye shi da tutiya ko tutiya-aluminum gami coatings ko daidai bakin karfe. Farantin haɗin haɗin ƙarfe suna da haƙoran haƙora kuma ana kera su zuwa girma dabam dabam (wato tsayi da faɗi) da kauri ko ma'auni kuma an ƙirƙira su don watsa lodi a gefe a cikin itace. Ana kuma san su da ƙuƙumman ingarma, faranti masu haɗin ƙarfe, faranti mai gyara, ko farantin ƙusa. Koyaya, ba kowane nau'in faranti na ƙusa ne aka yarda da su don amfani da su a cikin trusses da sauran mahimman wurare masu mahimmanci ba.

Ana amfani da faranti na ƙusa don haɗa katako mai kauri ɗaya a cikin jirgi ɗaya. Lokacin da aka yi amfani da su a kan katako, ana danna su a gefen katako ta amfani da kayan aikin lantarki na musamman. Yayin da aka danna farantin a ciki, ƙusoshin duk suna "kore" lokaci guda da matsawa tsakanin adja.